UV
adhesive for General-purpose plastics
|
Item No.
|
Products'
features and typical usage
|
3301
|
Medium to low viscosity, no
bubbles, fast curing, high bonding strength and have an excellent
adhesion to all sorts of
common plastic, glass and metal, Often used in the adhesion of small and
medium-sized area.
|
3305
|
Low
viscosity, no bubbles, easy to operate, fast curing, high transparence, won't
turn to be yellow after a long time, have a strong adhesive strength to all
kinds of plastics; Often used in large areas bonding of plastics, small areas
or facade adhesive of crafts.
|
3306
|
High
viscosity, fast curing, high transparence, it has a strong adhesive strength
to all kinds of common plastics and metal. Often used in middle and small
areas adhesive of plastic bond metal.
|
3322
|
Medium
viscosity, high adhesive strength, wide range applicability, also have
excellent adhesive strength of all kinds of common plastics, glass, metal,
etc. Often used in self-bonding of plastics, plastic bond glass or metal,
suitable for the small areas operation.
|
3325
|
Medium
viscosity, have a good adhesion to TPU. Often used in TPU bond plastics,
glass or metal, etc.
|
Status
|
Parameters Name
|
Technical parameters
|
3301
|
3305
|
3306
|
3322
|
3325
|
Before UV curing
|
Liquid Color
|
Clear light yellow
liquid
|
Clear light yellow
liquid
|
Clear light yellow
liquid
|
Clear light yellow
liquid
|
Clear light yellow
liquid
|
Viscosity(cps,
tested under 25℃)
|
320-360
|
25-30
|
3500-5500
|
900-1700
|
2200-2800
|
Proportion (g/cm3)
|
1.05
|
1.07
|
1.06
|
1.07
|
1.08
|
PH value
|
6
|
6
|
7.5
|
6
|
7
|
During UV curing
|
setting time/sec'
|
4
|
2
|
5
|
2
|
2
|
Solid energy (mj/cm2)
|
500-600
|
500-600
|
500-600
|
1200
|
1200
|
After UV curing
|
Hardness
|
Shore A
|
/
|
/
|
/
|
/
|
/
|
Shore D
|
65
|
42
|
55
|
60
|
72
|
Pencil
|
/
|
/
|
/
|
/
|
/
|
Shrinkage rate(%)
|
3
|
3
|
3
|
2
|
2
|
Bibulous rate(%)
|
2
|
2
|
2
|
2
|
2
|
temperature-resistant
scope(℃)
|
-5~150
|
-5~150
|
5~150
|
-5~150
|
-5~150
|
Polymer content(%)
|
100%
|
100%
|
100%
|
100%
|
100%
|
Tensile strength (MPa)
|
>14
|
>16
|
>12
|
>14
|
>14
|
Shear
strength(MPa)
|
/
|
/
|
/
|
/
|
/
|
Peel
strength (Kgf/cm2)
|
/
|
/
|
/
|
/
|
/
|
Elongation at
break
|
/
|
/
|
/
|
/
|
/
|
Light transmittance (%)
|
/
|
/
|
/
|
/
|
/
|
Refractive index
|
/
|
/
|
/
|
/
|
/
|
Elastic modulus
|
/
|
/
|
/
|
/
|
/
|
Dielectric constant (1MHz)
|
3.9
|
3.9
|
3.9
|
3.9
|
3.9
|
Dielectric loss(1MHz)
|
0.03
|
0.03
|
0.03
|
0.03
|
0.03
|
Dielectric strength (KV/MM)
|
27
|
27
|
30
|
30
|
30
|
Surface resistivity(Ω.cm)
|
0.8 x 1016
|
0.8 x 1016
|
0.8 x 1016
|
0.8 x 1016
|
0.8 x 1016
|
Volume resistivity(Ω.cm)
|
1.3 x 1016
|
1.3 x 1016
|
1.3 x 1016
|
1.3 x 1016
|
1.3 x 1016
|
Spec
|
1KG/bottle
|
Shelflife
|
One
Year(Seal storage and comply with storage conditions.)
|
Notes
|
1.
Storage under 8℃-25℃, in the dark, sealing, ventilation, cool
conditions, and far away from children.
2.
Keep air
ventilation when using, and take the safe protection measures, such as don't
use your skin to touch the resin directly or longly.
|
Remarks
|
1.)
Viscosity standard: Tested
under 25℃±0.5, by using the container with
diameter 6-7cm, and height 10cm.
2.) The setting
time of above items were tested under the condition of glass bond glass with 40w and light intensity is under
7.5mW/cm2. 3.)
Above tensile & shear strength data tested when glass bond glass, glass
bond crystal.
4.)
Other test parameters are tested on the basis of the national testing.
|